6-7
INSTRUCTION SET SUMMARY
6.2.1.7.CONTROL TRANSFER INSTRUCTIONS
JMP
Jump
JE/JZ
Jump if equal/Jump if zero
JNE/JNZ
Jump if not equal/Jump if not zero
JA/JNBE
Jump if above/Jump if not below or equal
JAE/JNB
Jump if above or equal/Jump if not below
JB/JNAE
Jump if below/Jump if not above or equal
JBE/JNA
Jump if below or equal/Jump if not above
JG/JNLE
Jump if greater/Jump if not less or equal
JGE/JNL
Jump if greater or equal/Jump if not less
JL/JNGE
Jump if less/Jump if not greater or equal
JLE/JNG
Jump if less or equal/Jump if not greater
JC
Jump if carry
JNC
Jump if not carry
JO
Jump if overflow
JNO
Jump if not overflow
JS
Jump if sign (negative)
JNS
Jump if not sign (non-negative)
JPO/JNP
Jump if parity odd/Jump if not parity
JPE/JP
Jump if parity even/Jump if parity
JCXZ/JECXZ
Jump register CX zero/Jump register ECX zero
LOOP
Loop with ECX counter
LOOPZ/LOOPE
Loop with ECX and zero/Loop with ECX and equal
LOOPNZ/LOOPNELoop with ECX and not zero/Loop with ECX and not equal
CALL
Call procedure
RET
Return
IRET
Return from interrupt
INT
Software interrupt
INTO
Interrupt on overflow
BOUND
Detect value out of range
ENTER
High-level procedure entry
LEAVE
High-level procedure exit
